5 thoughts on “What is the main work of the fitter?”
Pete
Everyone knows that the factory has a lot of work, and the work segmentation is very in place. Many types of work have different positions. Each worker is struggling in his own post. Everyone should have heard of the person who is a fitter as a fitter. They are all all -around talents. Their hands -on ability is very strong and is a kind of oil. The main work of traditional clamps is to attack, cut, grind, correction, rivet, etc., and gradually deepen the level of industrialization. For employment opportunities, they can not only do the work of traditional fitters, but also maintain and maintain equipment and instruments. Therefore, we are called our career as a tenure oil position, which is completely fine. This workers use various measuring tools to measure various equipment and raw materials, and even some veteran holders also have the operation of car tools, milling machines, planes and other instruments, and use them to process the materials they need. They also have electrical certificates, basically they have a certificate of employment. In terms of the number of skills, the fitter and any post competition have not lost. The working environment of the fitter is slightly harsh. Sometimes the components they repair need to be installed at high altitudes, which involves high -altitude operations, so if you want to be a good fitter, you need to have sufficient safety awareness to obey the rules and regulations. The system, which is very necessary for the three wears, because some factories need to let the fitter be responsible for equipment maintenance and maintenance. When doing operations, you must perform a power off operation. Under the circumstances, you need to wear the necessary protective equipment. If you are a young man and want to engage in the fitter industry, you can start with apprentices. The position of the fitter can make you come into contact with new knowledge every day. It is very conducive to personal development and the improvement of personal comprehensive quality.
Pay content for time limit to check for freenAnswer Hello!nThe main work of the fitter is: cutting, mechanical assembly and repairing manual operations, because they often use tiger clamps to hold workpieces on the fitting platform. The clamp work industry mainly includes cutting, cutting, sawing cutting, threading, drilling, hinge, attack wire and silk (see thread processing), scraping, grinding, correction, bending and riveting. Some mechanical methods that are not suitable or cannot be solved can be completed by the fitter.nI hope my answer can help younBleaknMore 2nBleak
Pay content for time limit to check for freenThe main work of answering the fitter is: cutting processing, mechanical assembly, and repairing manual operations, because they often use tiger clamping workpieces on the fitting platform to operate. The clamp work industry mainly includes cutting, cutting, sawing cutting, threading, drilling, hinge, attack wire and silk (see thread processing), scraping, grinding, correction, bending and riveting. Some mechanical methods that are not suitable or cannot be solved can be completed by the fitter. Such as: the lines, precision processing, scraping and cutting models and making molds in the process of parts processing, as well as inspection and repair. The assembly work includes components, components, component assembly and assembly assembly in accordance with the assembly technical requirements of mechanical equipment, and after adjustment, inspection and testing, make it a qualified machinery and equipment.
It will use some pliers, some other measuring tools, and check these materials and lathes to check these connections, but you must have a certificate to serve.
Everyone knows that the factory has a lot of work, and the work segmentation is very in place. Many types of work have different positions. Each worker is struggling in his own post. Everyone should have heard of the person who is a fitter as a fitter. They are all all -around talents. Their hands -on ability is very strong and is a kind of oil.
The main work of traditional clamps is to attack, cut, grind, correction, rivet, etc., and gradually deepen the level of industrialization. For employment opportunities, they can not only do the work of traditional fitters, but also maintain and maintain equipment and instruments. Therefore, we are called our career as a tenure oil position, which is completely fine.
This workers use various measuring tools to measure various equipment and raw materials, and even some veteran holders also have the operation of car tools, milling machines, planes and other instruments, and use them to process the materials they need. They also have electrical certificates, basically they have a certificate of employment. In terms of the number of skills, the fitter and any post competition have not lost.
The working environment of the fitter is slightly harsh. Sometimes the components they repair need to be installed at high altitudes, which involves high -altitude operations, so if you want to be a good fitter, you need to have sufficient safety awareness to obey the rules and regulations. The system, which is very necessary for the three wears, because some factories need to let the fitter be responsible for equipment maintenance and maintenance. When doing operations, you must perform a power off operation. Under the circumstances, you need to wear the necessary protective equipment.
If you are a young man and want to engage in the fitter industry, you can start with apprentices. The position of the fitter can make you come into contact with new knowledge every day. It is very conducive to personal development and the improvement of personal comprehensive quality.
Pay content for time limit to check for freenAnswer Hello!nThe main work of the fitter is: cutting, mechanical assembly and repairing manual operations, because they often use tiger clamps to hold workpieces on the fitting platform. The clamp work industry mainly includes cutting, cutting, sawing cutting, threading, drilling, hinge, attack wire and silk (see thread processing), scraping, grinding, correction, bending and riveting. Some mechanical methods that are not suitable or cannot be solved can be completed by the fitter.nI hope my answer can help younBleaknMore 2nBleak
Pay content for time limit to check for freenThe main work of answering the fitter is: cutting processing, mechanical assembly, and repairing manual operations, because they often use tiger clamping workpieces on the fitting platform to operate. The clamp work industry mainly includes cutting, cutting, sawing cutting, threading, drilling, hinge, attack wire and silk (see thread processing), scraping, grinding, correction, bending and riveting. Some mechanical methods that are not suitable or cannot be solved can be completed by the fitter. Such as: the lines, precision processing, scraping and cutting models and making molds in the process of parts processing, as well as inspection and repair. The assembly work includes components, components, component assembly and assembly assembly in accordance with the assembly technical requirements of mechanical equipment, and after adjustment, inspection and testing, make it a qualified machinery and equipment.
It will use some pliers, some other measuring tools, and check these materials and lathes to check these connections, but you must have a certificate to serve.
It is mainly to process some parts or assembled some parts. This job is difficult to work, and it needs to be very careful when operating.